|
BIMHome v1.0.0
BIMHome接口文档说明
|
#include <libdrfx/drw_base.h>#include <QString>#include <Base/Tools2D.h>#include "DxfVector.h"#include "Base/BallonText.h"类 | |
| class | Calculator |
| class | EntityFactory |
| class | FileOperator |
| class | LineRenderer |
命名空间 | |
| namespace | Part |
| namespace | TechDraw |
枚举 | |
| enum class | Side { NoSide = 0 , LeftHand = 1 , RightHand = 2 , BothSides = 3 } |
| Side used for side of a point relative to an entity (right hand or left hand side) 更多... | |
变量 | |
| ANGLE | |
| Angstrom = 11 | |
| Angstrom: 10^-10m | |
| ANSI31 | |
| ANSI37 | |
| AR_B816 | |
| AR_B816C | |
| AR_B88 | |
| AR_BRELM | |
| AR_BRSTD | |
| AR_CONC | |
| AR_HBONE | |
| AR_PARQ1 | |
| AR_RROOF | |
| AR_RSHKE | |
| AR_SAND | |
| Architectural | |
| Architectural (e.g. | |
| ARMORED | |
| Astro = 18 | |
| Astro: 149.6 x 10^9m | |
| AtLeast | |
| Taller characters will override | |
| Backward | |
| Mirrored in X | |
| BLOCK_ANNOTATION | |
| BOX | |
| BRASS | |
| BRICK | |
| Centimeter = 5 | |
| Centimeter: 0.01m | |
| CLAY | |
| CLAY1 | |
| CORK | |
| CROSS | |
| DASH | |
| Decameter = 15 | |
| Decameter: 10m | |
| Decimal | |
| Decimal (e.g. | |
| Decimeter = 14 | |
| Decimeter: 0.1m | |
| Deg | |
| Degrees | |
| DegreesDecimal | |
| Degrees with decimal point (e.g. | |
| DegreesMinutesSeconds | |
| Degrees, Minutes and Seconds (e.g. | |
| DIMENSIONLINE | |
| DOLMIT | |
| DOTS | |
| DWG2004 | |
| DWG2008 | |
| DXF2004 | |
| EARTH | |
| Engineering | |
| Engineering (e.g. | |
| ESCHER | |
| EXTENSIONLINE | |
| FLEX | |
| Foot = 2 | |
| Foot: 12 Inches | |
| Fractional | |
| Fractional (e.g. | |
| Gigameter = 17 | |
| Gigameter: 1000000m | |
| GOST_GLASS | |
| GOST_GROUND | |
| GOST_WOOD | |
| Gradians | |
| Gradians with decimal point (e.g. | |
| GRASS | |
| GRATE | |
| GRAVEL | |
| HAAligned | |
| Aligned | |
| HACenter | |
| Centered | |
| HALeft | |
| Left | |
| HAMiddle | |
| Middle | |
| HARight | |
| Right | |
| Hectometer = 16 | |
| Hectometer: 100m | |
| HEX | |
| HONEY | |
| HOUND | |
| Inch = 1 | |
| Inch | |
| INSUL | |
| JIS_LC_20 | |
| JIS_LC_20A | |
| JIS_LC_8 | |
| JIS_LC_8A | |
| JIS_RC_10 | |
| JIS_RC_15 | |
| JIS_RC_18 | |
| JIS_RC_30 | |
| JIS_STN_1E | |
| JIS_STN_25 | |
| JIS_WOOD | |
| Kilometer = 7 | |
| Kilometer: 1000m | |
| LEADER_NONE | |
| LeftCrosshair | |
| Left type isometric Crosshair | |
| LeftToRight | |
| Left to right | |
| Lightyear = 19 | |
| Lightyear: 9460731798 x 10^6m | |
| LINE | |
| constexpr double | m_piX2 = M_PI * 2 |
| Meter = 6 | |
| Meter | |
| Microinch = 8 | |
| Microinch: 0.000001 | |
| Micron = 13 | |
| Micron: 10^-6m | |
| Mil = 9 | |
| Mil = 0.001 Inch | |
| Mile = 3 | |
| Mile: 1760 Yards = 1609 m | |
| Millimeter = 4 | |
| Millimeter: 0.001m | |
| MUDST | |
| Nanometer = 12 | |
| Nanometer: 10^-9m | |
| NET | |
| NET3 | |
| None = 0 | |
| Normal text | |
| NONEPAT = -1 | |
| Parsec = 20 | |
| Parsec: 30857 x 10^12 | |
| PLAST | |
| PLASTI | |
| Rad | |
| Radians | |
| Radians | |
| Radians with decimal point (e.g. | |
| RightCrosshair | |
| Right type isometric Crosshair | |
| SACNCR | |
| Scientific | |
| Scientific (e.g. | |
| SOLID | |
| SQUARE | |
| STARS | |
| STEEL | |
| SWAMP | |
| TEXT_ANNOTATION | |
| TOLERANCE_ANNOTATION | |
| TopCrosshair | |
| Top type isometric Crosshair | |
| TopToBottom | |
| Top to bottom | |
| TRANS | |
| TRIANG | |
| VABaseLine = 0 | |
| VABottom | |
| VAMiddle | |
| Yard = 10 | |
| Yard: 3 Feet | |